Exit Security Double Door Outswing Bar (Model SB)The Exit Security SB Series Double Door Outswing Bar is a heavy-duty, powder-coated steel push bar designed to secure double outswing doors without any door or frame preparation. Available in 60", 72", and 96" opening widths, it installs in 2030 minutes with standard tools and ships complete with all hardware.How to Measure Your OpeningThe bar set consists of two 1" square tubes (one per door leaf) and one 1" square tube that spans the jamb.1" bars: Take the width of each individual door leaf and subtract 2".1" bar: Add the widths of both door leaves together, then add 2".Example 60" opening (24" + 36" leaves): The 1" bars are 21" and 33" long. The 1" bar is 62" long.Model number guide: In model SB-01-0072, 01 = outswing and 72 = the total door opening width in inches (sum of both door leaf widths).What's Included(2) 1" square steel tubes mount permanently to each door leaf(1) 1" square steel tube spans the door jamb, with red silk-screened arrow and LIFT UP lettering(4) " "L" bolts, 6" long(8) " flange nuts(4) 5/16" elevator bolts and step nuts(1) 1" end cap, (1) 1" end cap, (1) " red end capSteel GripStick-on caution decal: "CAUTION This door to remain unlocked during occupancy"Storage bracketInstruction sheetInstallationNo door or frame preparation requiredNo special tools needed beyond standard shop toolsEstimated installation time: 2030 minutesTools required: electric drill, 5/16" drill bit, crescent wrench, tape measure, pencilDownload the Measurement Guide (PDF)