DESIGN HARDWARE J SERIES LOCKSET Specifications: ANSI: Meets ANSI - A156.2, Grade 2 StandardsUL Listings: UL Listed for A" Label 3 Hour Fire DoorsADA Compliance: Meets ADA and ANSI A117.1 accessibility codesLock Chassis: Steel, Zinc dichromated for Corrosion ResistanceTrim: 5" Solid zinc diecast levers, 3 3/8" wrought brass rosesLever Return: Anti-sag mechanism with independent lever return springs to prevent lever sagHanding: Non-Handed - Completely reversible (S-A and S-B lever styles are handed)Backset and Latchface: 2 3/4" backset std. with 1-1/8" x 2-1/4" latchface, 2 3/8" backset is available with 1" x 2 1/4" latchface both with self adjusting front for square or beveled edge doorsLatchbolt: Stainless Steel with 1/2" projection, Deadlocking on keyed functions and exit latchCylinder Options: 6 Pin Brass, C Kwy, with 2 Keys or Prepared for Small format IC core (less core)Strikes: 4-7/8" x 1-1/4" ASA standard -T strike and Full lip strikes availableDoor Preparation: ANSI A115.2 - 2-1/8" crossbore with (2) 3/8" Thru bolt holesOptional Thru Bolts: Removable Thru Bolts - Can be installed without thru boltsDoor Thickness: Factory Set for 1-3/4" - can be adjusted to fit 1-3/8" up to 2" thickStandard Lever Design: Flat (standard - stocked in US26D and US10B)Other Lever Choices: Curved, Half Curved, S-A and S-BStandard Finish: US26D and US10B (in stock in flat lever)Special Order Finishes: US3 PVD*, US4, US15, US26 PVD* (PVD = Lifetime Finish)Fasteners: Combination screws for wood or metal doors and framesWarranty: Limited Lifetime Warranty RESOURCES and DOWNLOADS Installation Instruction Template